KTM Adventure Luggage Carrier
145.20 € incl. VAT
Prices include 21% VAT (Romania). The final VAT is calculated at checkout based on your delivery country. EU businesses with a valid VAT number can buy without VAT — just enter it at checkout.
Extra-large KTM Powerparts carrier plate for KTM Adventure models, designed to carry luggage rolls and soft bags with maximum stability.
- Made as the base for the KTM luggage bag 60112078000
- Maximum load 5 kg
- For soft luggage only — not suitable for a top case
Original KTM Powerparts part 60312978044, sold and supported by Heavy Duties.
1 in stock
- Shipping across Romania & Europe
- 14-day returns
- Made in Romania by Heavy Duties
- Secure payment
This KTM Powerparts carrier plate gives KTM Adventure models an extra-large, flat base for luggage rolls and soft bags, and is the intended companion for the KTM luggage bag 60112078000. Its mounting slots allow several strapping layouts, so the same plate works for a weekend bag or an expedition roll. It is an original KTM Powerparts part, sold and supported by Heavy Duties.
Key features
- Extra-large plate for oversized luggage rolls and bags
- Mounting slots for several strapping options
- Maximum load 5 kg
- Low-profile design that keeps the KTM lines clean
- Soft luggage only: not designed for mounting a top case
- Complete: supplied with the spare parts needed for installation
Fits
- KTM Duke 125–790
- KTM Adventure 250–1290
- KTM 690 Enduro R / SMC R
Fitment varies by model year — check the KTM compatibility information for part number 60312978044 against your bike before ordering.
Technical specifications
| Brand | KTM Powerparts |
|---|---|
| Part number | 60312978044 |
| Type | Extra-large rear carrier plate |
| Maximum load | 5 kg |
| Matching bag | KTM luggage bag 60112078000 (sold separately) |
| Use | Luggage rolls and soft bags; not for top cases |
Heading out with more than a roll bag? Heavy Duties makes pannier racks for the KTM 390 Adventure, the KTM 790/890 Adventure and the KTM 1050–1290 Adventure (up to 2020). For the carrier itself, a waterproof roll bag such as the Kriega US Drypack or the Enduristan Tornado rollbag is a natural match.
Frequently asked questions
Can I fit a top case on this plate?
No. It is built for soft luggage only and is not suitable for a top case.
Which bag is it designed for?
It is the intended base for the KTM luggage bag 60112078000, and it also carries luggage rolls and other soft bags.
How much can I load on it?
Up to 5 kg.
Which KTM models does it fit?
The plate is listed for KTM Duke 125–790, KTM Adventure 250–1290 and the KTM 690 Enduro R / SMC R. Check part number 60312978044 against your model year or ask us before ordering.
| Series | Models | Years |
| KTM Adventure | 250, 390, 790, 890, 1050, 1090, 1190, 1290 (All variants: R, S, T, Rally) | 2013 – 2024 |
| KTM Duke | 125, 200, 250, 390, 690, 790, 890 (Including R & L versions) | 2011 – 2024 |
| KTM Enduro / SMC | 690 Enduro R, 690 SMC R | 2019 – 2024 |
KTM Adventure Luggage Carrier Compatibility Matrix
Technical Resources & Installation
For a safe and precise installation, please consult the official mounting guide provided by the manufacturer. This document contains the required torque specifications and the correct assembly sequence for all components.
-
Download Installation Guide: KTM Fitting Instructions - 60312978044
| Weight | 1 kg |
|---|
Sizes
Three sizes, built to balance carrying capacity and handling.
450 × 220 × 420 mm
Compact and balanced — ideal for lighter setups and shorter trips.
480 × 250 × 420 mm
Maximum volume and stability for long journeys and two-up riding.
Exhaust cutout set
Model-specific sets with a cut-out profile on the exhaust side, keeping total width minimal.
Colours
Electrostatic powder coating for corrosion, UV and abrasion resistance — or raw aluminium.
Natural aluminium
No coating — a pure, industrial look that shows every journey.
Grey coated
Electrostatic powder coating in a refined, understated tone.
Black coated
The classic adventure finish — tough, stealthy, weather-resistant.
Mix & match
Combine coated and natural panniers — ask us for custom combinations.
Lid opening
Two classic configurations, or the dual-action Alterna-Latch.
2 locks · removable lid
Both latches release for full lid removal — handy as a tray at camp.
1 lock · 1 hinge
One latch opens, the other works as a hinge.
Alterna-Latch
Dual lock / hinge — opens from either side or lifts off completely.
Extra options
Add protection and practicality — all built to the same Heavy Duties standard.
Extreme protections
2 mm aluminium plates riveted over exposed edges for hard off-road use.
Pannier handles
Carry the pannier off the bike or strap gear on top.
5 mm foam isolation
Polyethylene inner padding comes with every set.
Built for the long road
Made in Romania
Designed, welded and finished in our own workshop.
Laser-scanned fit
Every mount point captured on the real motorcycle.
Impact release
Pannier mounting designed to protect the rider in a crash.
Shipped across Europe
Packed carefully and tracked to your door.
Questions before you order
Not sure this fits your bike or setup? Call us on +40 785 076 265 or write to heavyduties@gmail.com — the people who build it will answer.
Every product is designed for the exact models listed in its title and categories, using measurements taken on the real bike. If your model or year is not listed, contact us before ordering.
We ship across Romania and Europe. Most orders leave the workshop within a few working days; made-to-order items can take longer and we will tell you the exact timing.
Yes — you have 14 days to return a product. See our return policy for the details.
Check the compatibility notes in the description: panniers mount on Heavy Duties racks, and racks are specific to each bike. You can find all parts for your bike in Shop by motorcycle.
Reviews
There are no reviews yet