YAMAHA XTZ750 Super Tenere Crash Bars – Enduro
105.88 € incl. VAT
Prices include 21% VAT (Romania). The final VAT is calculated at checkout based on your delivery country. EU businesses with a valid VAT number can buy without VAT — just enter it at checkout.
Enduro crash bars for the Yamaha XTZ750 Super Ténéré that protect the engine and lower casings in a fall. Made in our workshop in Romania.
- 21.3 mm steel tube, 2.6 mm wall, 3.6 kg
- MIG + TIG welded, sandblasted and powder coated
- Bolt-on, no cutting or drilling · ready for Pipers add-ons
34 in stock
- Shipping across Romania & Europe
- 14-day returns
- Made in Romania by Heavy Duties
- Secure payment
The Heavy Duties Enduro crash bars for the Yamaha XTZ750 Super Ténéré protect the engine and lower casings when the bike goes down. The lightest of our three XTZ750 versions, it keeps weight down for technical terrain and bolts to the frame mounting points.
Key features
- Strong: 21.3 mm steel tube with a 2.6 mm wall, 3.6 kg in total
- Protection where it counts: engine and lower casings
- Durable joints: MIG and TIG welded for strength and resistance to vibration
- Corrosion-resistant: sandblasted, then electrostatically powder coated
- Bolt-on: fits the frame mounting points with no cutting or drilling, and leaves access for routine maintenance
- Expandable: ready for Heavy Duties Pipers to carry straps, canisters or tool tubes; the Pipers also act as replaceable impact buffers
Fits
- Yamaha XTZ750 Super Ténéré
Technical specifications
| Tube | 21.3 mm steel, 2.6 mm wall |
|---|---|
| Weight | 3.6 kg |
| Protection | Engine and lower casings |
| Welding | MIG + TIG |
| Finish | Sandblasted, black electrostatic powder coat |
| Installation | Bolt-on, frame mounting points |
| Add-ons | Heavy Duties Pipers (21.3 mm) |
| Made in | Romania (EU) |
For luggage, see the XTZ750 symmetrical pannier racks and Classic or Rhino aluminium panniers. A centre stand is also available.
Frequently asked questions
Enduro, Soft or Adventure — which one?
Enduro (3.6 kg) guards the engine and lower casings; Soft (4.4 kg) adds the lower fairing; Adventure (6.5 kg) gives maximum coverage including the fairing and radiators.
Do I need to drill or cut anything?
No. The bars bolt to the existing frame mounting points, with no cutting or drilling.
Can I carry extra gear on the bars?
Yes. Clamp Heavy Duties Pipers onto the 21.3 mm tube to anchor straps, fuel or water canisters and tool tubes. The plastic Pipers also act as replaceable impact buffers.
| Weight | 7 kg |
|---|---|
| Dimensions | 90 × 40 × 50 cm |
7 reviews for YAMAHA XTZ750 Super Tenere Crash Bars – Enduro
Sizes
Three sizes, built to balance carrying capacity and handling.
450 × 220 × 420 mm
Compact and balanced — ideal for lighter setups and shorter trips.
480 × 250 × 420 mm
Maximum volume and stability for long journeys and two-up riding.
Exhaust cutout set
Model-specific sets with a cut-out profile on the exhaust side, keeping total width minimal.
Colours
Electrostatic powder coating for corrosion, UV and abrasion resistance — or raw aluminium.
Natural aluminium
No coating — a pure, industrial look that shows every journey.
Grey coated
Electrostatic powder coating in a refined, understated tone.
Black coated
The classic adventure finish — tough, stealthy, weather-resistant.
Mix & match
Combine coated and natural panniers — ask us for custom combinations.
Lid opening
Two classic configurations, or the dual-action Alterna-Latch.
2 locks · removable lid
Both latches release for full lid removal — handy as a tray at camp.
1 lock · 1 hinge
One latch opens, the other works as a hinge.
Alterna-Latch
Dual lock / hinge — opens from either side or lifts off completely.
Extra options
Add protection and practicality — all built to the same Heavy Duties standard.
Extreme protections
2 mm aluminium plates riveted over exposed edges for hard off-road use.
Pannier handles
Carry the pannier off the bike or strap gear on top.
5 mm foam isolation
Polyethylene inner padding comes with every set.
Built for the long road
Made in Romania
Designed, welded and finished in our own workshop.
Laser-scanned fit
Every mount point captured on the real motorcycle.
Impact release
Pannier mounting designed to protect the rider in a crash.
Shipped across Europe
Packed carefully and tracked to your door.
Questions before you order
Not sure this fits your bike or setup? Call us on +40 785 076 265 or write to heavyduties@gmail.com — the people who build it will answer.
Every product is designed for the exact models listed in its title and categories, using measurements taken on the real bike. If your model or year is not listed, contact us before ordering.
We ship across Romania and Europe. Most orders leave the workshop within a few working days; made-to-order items can take longer and we will tell you the exact timing.
Yes — you have 14 days to return a product. See our return policy for the details.
Check the compatibility notes in the description: panniers mount on Heavy Duties racks, and racks are specific to each bike. You can find all parts for your bike in Shop by motorcycle.
Kevin –
Hello guys, the crash bars ate looking great. Any chance they are compatible – possible to mount on the Tenere 660 3yz from 1997?
Heavy Duties Team (store manager) –
Hello Kevin. Thank you very much for your appreciation. Unfortunately, there are not going to fit. We are very sorry!
Christopher Frost –
Hey crash bars looking great. When I order 1, do I get for both sides? Thanks 🙂
Regards Chris
andreiheavyduties (store manager) –
Hi Christopher. Both sides are included in one set, among with all the bolts needed for the installation.
Marcel Isenschmid (verified owner) –
After assembling the part i just thought…. YOU BASTARDS!!! This is an absolute magnificent piece of equipment!!! Totally LOVE IT!! The guy who developed this thing is a master in his field!! Looks perfect and fits like a glove. Chapeau!!! For all those who are considering buying the thing, do it!
Greetings from Switzerland 😉
Θάνος –
Πολύ καλά ανθεκτικά δυνατά καλή προστασία τα έχω δοκιμάσει και προστατεύει πολύ καλά τη μηχανή.
Dominik –
Just mounted it. Looks awesome, feels solid and fits like chalk and cheese. Thank you guys!
Little recommendation: remove the cover of your front… 😉
ANTONIO (verified owner) –
Very good quality and easy installation.
JEAN-LUC MICHEL (verified owner) –
Facile à monter et de bonne qualité